MICROCHIP PIC24FJ256DA210-H

PIC24FJ256DA210 Based Header Board comes with TQFP100 Package. The header has 2.54mm standard width connector. So, It can easily solder on general Purpose PCB for experimental purpose

OVERVIEW

MICROCHIP PIC24FJ256DA210 (With Integrated Graphic Controller)

The PIC24FJ256DA210 family enhances on the existing line of Microchip‘s 16-bit microcontrollers, adding a new Graphics Controller (GFX) module to interface with a graphical LCD display and also adds large data RAM, up to 96 Kbytes. The PIC24FJ256DA210 family allows the CPU to fetch data directly from an external memory device using the EPMP module

Graphic Controller Features

	
•	Three Graphics Hardware Accelerators to Facilitate Rendering of Block Copying, Text and Unpacking of Compressed Data
•	Color Look-up Table (CLUT) with Maximum of 256 Entries .
•	1/2/4/8/16 bits-per-pixel (bpp) Color Depth Set at Run Time.
•	Display Resolution Programmable According to Frame Buffer:
	- Supports direct access to external memory on devices with EPMP
	- Resolution supported is up to 480x272 @ 60 Hz,16 bpp; 640x480 @ 30 Hz, 16 bpp or 640x480 @ 60 Hz, 8 bpp
•	Supports Various Display Interfaces:
	- 4/8/16-bit Monochrome STN
	- 4/8/16-bit Color STN
	- 9/12/18/24-bit Color TFT (18 and 24-bit displays are connected as 16-bit, 5-6-5 RGB color format)

Universal Serial Bus features:

•	USB v2.0 On-The-Go (OTG) Compliant
•	 Dual Role Capable - Can act as either Host or Peripheral .
•	Low-Speed (1.5 Mbps) and Full-Speed (12 Mbps) USB Operation in Host mode .
•	Full-Speed USB Operation in Device mode .
•	High-Precision PLL for USB .
•	Supports up to 32 Endpoints (16 bidirectional):
	- USB module can use the internal RAM location from 0x800 to 0xFFFF as USB endpoint buffers .